Pool-code fence
Pool-code fences — engineered to pass on the first inspection.
48-inch minimum height. Climb-resistant picket spacing. Self-closing, self-latching gates. The Florida pool-safety code is specific — and we build to it exactly, not approximately.
What this is
Pool-code fence in Miami-Dade — what Florida's pool-safety code requires.
A pool-code fence is a fence built to Florida's residential pool-safety code, which mandates a barrier around any pool or spa to prevent unintentional access by children. The rules are specific: minimum height of 48 inches measured on the side facing away from the pool, no climbable footholds, picket spacing tight enough that a small child cannot pass through (typically no more than 1.75 inches), and any access gate must be self-closing and self-latching with the latch installed above a code-specified height.
Allday Fence engineers pool-code fences to pass the first county or municipal pool-safety inspection — aluminum (the most common material around chlorinated water), PVC, or other code-compliant systems. We file the permit with the right Florida Product Approval / Miami-Dade NOA numbers, install to the approved plans, walk the inspector through the install, resolve any field corrections on the spot when possible, and close the permit against the property record. The certificate of occupancy / final closeout is part of the project.
What pool code requires
The Florida pool-safety barrier — every detail matters.
Pool fences are one of the most heavily inspected residential structures in South Florida — and one of the most commonly failed. The code is precise: minimum heights, picket-spacing maximums, gate-latch heights, gate-swing direction, climbability rules around adjacent surfaces. We design every pool fence to clear all of it the first time the inspector walks the property.
Code requirements at a glance
What we build to.
48-inch minimum.
Measured on the side away from the pool. Some municipalities and HOAs require taller — we design to whichever rule is stricter for the property.
Climb-resistant.
Pickets spaced so a child can't pass through — typically no more than 1.75 inches between pickets, with attention to any horizontal rail that could act as a foothold.
Self-closing & self-latching.
Gates must swing outward from the pool, close on their own, latch on their own, and place the latch above the height the code specifies. Hardware matters.
No climbable surfaces nearby.
The barrier must remain unclimbable from outside — no chairs, planters, or low rails within reach. We walk the perimeter at design to flag any issue.
Built for chlorine + salt.
Powder-coated aluminum is the workhorse — doesn't rust around pool water, holds its finish for 15+ years. PVC works where the look fits the architecture.
Filed and finaled.
Pool-safety fences require a permit. We pull it, file the package, schedule the inspection, walk it with the inspector, and close it against the property record.
How the project runs
From property pull to closed pool-safety permit.
Site walk + property record
We walk the pool deck, measure clearances, and pull the MyHausFax™ property record. Existing permits and any open files surface here.
Design to code
Height, spacing, gate swing, latch height, and climbability all designed to the strictest standard that applies — county, municipality, HOA.
Install
Posts set in concrete to spec. Powder-coated aluminum hardware. Gates hung, self-closers tuned, latches set above code height.
Pool-safety inspection
We schedule the inspection, walk the inspector, and resolve field corrections on the spot. Permit closed against the property record.
Common questions
Common pool-code fence questions.
What is Florida pool-code fence?
Florida's residential pool-safety code requires a barrier around any pool or spa. The fence must be at least 48 inches tall, have no climbable footholds, have picket spacing that a child can't pass through (typically no more than 1.75 inches), and any gates must be self-closing and self-latching with the latch above a specified height. We build to those exact rules.
What height does a pool fence need to be in Miami-Dade?
48 inches minimum, measured on the side away from the pool. Some municipalities and HOAs require taller. We design to whichever standard is stricter for the property — Miami-Dade County, the municipality, and the HOA all get checked before we quote.
Does aluminum or PVC make a better pool fence?
Both work and both pass code when engineered correctly. Aluminum (powder-coated, picket style) is the most common because it doesn't rust around chlorinated water, holds up in salt air, and looks crisp for 15+ years. PVC works when the look fits the architecture. We help you decide based on your pool deck, the home, and what's around it.
Do you handle the pool-safety inspection?
Yes. We schedule the inspection with the county or municipality, walk the inspector through the install, and resolve any field corrections — gate latch height, picket spacing, hardware compliance — on the spot when possible. We don't hand over an open permit.
I have an existing pool with no compliant fence. Can you fix it?
Yes. Pool-safety enforcement is real and increasingly active in Miami-Dade County. We bring the existing barrier up to code, file the permit, and close it against the property record. If the existing fence is unpermitted, our sister company Permit Solutions Services handles the after-the-fact resolution side in parallel.
How long does it take to install a pool-code fence?
Most residential pool fences install in 1–2 days on site once materials are on hand and the permit is approved. Permit timing typically runs 2–4 weeks depending on the municipality.
What happens if my pool fence fails inspection?
If the inspector flags a non-compliance — picket spacing slightly too wide, a gate that doesn't self-close, a latch installed too low — most issues are field-correctable on site, and we resolve them on the spot when possible and re-call the inspection same week. We don't hand the project over with an open or failed permit; the certificate of occupancy / final closeout is part of every Allday Fence pool-code project.