Commercial chain link
Commercial chain link — built to the spec, phased to the operation.
Galvanized and vinyl-coated chain link from 4 ft to 12 ft, slide and roll gates, security toppings, and engineered perimeters. We work with general contractors, logistics, schools, HOAs, and municipalities across Miami-Dade County.
What this is
Commercial chain link fence in Miami-Dade — what it is, what we install.
Commercial chain link fence is the workhorse perimeter system for industrial, logistics, warehouse, school, and HOA sites — galvanized or vinyl-coated steel fabric woven into a continuous diamond mesh, hung between steel posts on engineered footings. Allday Fence (Florida contractor license #08BS00863) installs commercial chain link from 4 ft to 12 ft in heights, 9-gauge through heavier 6-gauge fabric, with manual or motorized slide and roll gates (UL-325 compliant operators), security toppings (three-strand barbed wire, razor ribbon), and ornamental color matches where the site requires them.
Workflow is built for general contractors and property managers: sealed drawings and wind-load calcs filed with the Miami-Dade municipal permit office, the right Florida Product Approval / NOA numbers in the package, certificates of insurance issued before mobilization, phased install to keep yard operations live, and a final inspection closed against the parcel. We routinely bid scopes from RFPs and GC specs, returning written bids with schedule and any engineering notes the scope needs.
Why commercial chain link
The workhorse perimeter for South Florida commercial sites.
Chain link is the most cost-effective and most adaptable perimeter system for industrial, logistics, school, recreation, and multi-family work. Galvanized fabric stands up to South Florida humidity; vinyl-coated finishes add aesthetic refinement when the site needs it. We engineer to the wind load, file the product approvals, and phase the install so the operation behind the fence stays live throughout the work.
What we install
Commercial chain link, end to end.
Galvanized chain link
Commercial-grade 9-gauge (or heavier) galvanized fabric from 4 ft to 12 ft. Top-rail standard; barbed and razor toppings available where zoning permits.
Vinyl-coated chain link
Same structural standard, color-coated fabric. Reads cleaner against architecture for HOAs, retail centers, and amenity perimeters.
Slide & roll gates
Manual and motorized slide and roll gates for warehouse, logistics, and industrial perimeters. UL-325 compliant operators, photo-eye and edge sensor safety.
Sports & recreation
Tennis, pickleball, basketball, and athletic-field enclosures. Backstops, windscreens, and gate hardware to the level the use case requires.
Temporary & construction
Construction-site perimeter and event fencing. Panel install, removal, and re-positioning during phased work.
Engineered systems
Sealed drawings, foundation details, and wind-load calculations when the project triggers engineering.
How commercial projects run
From site walk to closed-out file.
Site walk + spec review
We meet on-site, review the spec (or write one), and pull the property record so we know exactly what we're working with.
Permit + engineering
Plans, product approvals, and engineering when needed. Filed with the city, tracked through plan review.
Phased install
We work around your operation — yards stay open, traffic keeps moving, access stays controlled.
Final + close-out
Inspection scheduled, corrections handled, permit closed. We hand off a finaled file, not an open one.
Common questions
Common commercial chain-link questions.
What gauge and height of chain link do you install commercially?
Standard commercial chain link runs 9-gauge fabric in heights from 4 ft to 12 ft, with heavier 6-gauge available for high-security perimeters. We spec the fabric gauge, mesh size, and post schedule against the wind zone, the use case, and the city's product-approval requirements.
Can you install slide and roll gates?
Yes. Manual and motorized slide and roll gates for warehouse, logistics, and industrial perimeters. We work to UL-325 compliance on operators, install safety photo-eyes and edge sensors, and provide the maintenance schedule for the gate operator manufacturer.
Do you provide engineered drawings and product approvals?
Yes. For permitted commercial fence work in Miami-Dade County we provide sealed drawings, foundation details, wind-load calculations, and the Florida Product Approval / Miami-Dade NOA numbers required by the city. We file the package and respond to plan-review correspondence.
Can you keep our yard operational during install?
Yes — we phase commercial installs around active operations. For logistics and industrial sites we typically install in zones and re-secure the perimeter at the end of each day. Vehicle access, pedestrian access, and security control all stay live through the work.
Do you handle barbed wire, razor ribbon, and security toppings?
Yes — top-rail with three-strand barbed wire, razor ribbon, and security toppings where the site requires them and the zoning permits. We design and install to the standard the property's security plan calls for.
Can you bid from a GC's spec or RFP?
Yes, we regularly bid commercial fence scopes for general contractors, property managers, and developers. Send the spec, plan set, or RFP and we'll come back with a written bid, schedule, and any engineering notes the scope needs.